EN 
AR
PT
KO
DE
TR
FR
TA'RIFI
Texnik xususiyatlari
| Mahsulot nomi | SpeedyBee F405 WING FC board |
| MCU | STM32F405,168MHz,1MB Flash |
| IMU (Giroskop va akselerometr) | ICM-42688-P |
| Barometr | SPL006-001 |
| OSD chipi | AT7456E |
| qora quti | MicroSD karta uyasi |
| UART | 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection)) |
| I2C | 1x Magnitometr, raqamli havo tezligi sensori uchun ishlatiladi |
| ADC | 4x (VBAT, Current, RSSI, Analog AirSpeed) |
| PWM | 12x (11+1“LED”pad) |
| ELRS/CRSF receiver | Supported,connected to UART1 |
| SBUS | Built in inverter for SBUS input (UART2-RX) |
| LED | 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB |
| RSSI | Supported,Named as RS . |
| Qo'llab-quvvatlanadigan FC dasturiy ta'minoti | INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING |
| vazn | 8.9g |
| Mahsulot nomi | SpeedyBee F405 WING PDB board |
| Kirish kuchlanish oralig'i | 7~36V (2~6S LiPo) |
| Batareya kuchlanish sensori | Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot) |
| Batareya oqimi sensori | 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot) |
| TVS himoya diodi | ha |
| FC BEC chiqishi | Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip |
| VTX BEC output | Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera. |
| Servo BEC chiqishi | Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos. |
| vazn | 11.4g |
| Mahsulot nomi | SpeedyBee F405 WING Wireless board |
| Simsiz konfiguratsiya (rejimlarni almashtirish uchun BOOT tugmasini 6 soniya bosib turing) | BLE rejimida, Speedybee ilovasiga ulaning |
| Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc. | |
| Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner | |
| LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) | 4x WS2812 LED strip connectors, adjustable colors and flashing modes |
| Max 5.2V 1.3A, supports around 70pcs 5050 WS2812 LED beads | |
| On-board battery level indicator | 4x RGB indicator LED for battery level display by number of lights |
| vazn | 4.2g |
Biz bilan bog'lanish
